Modified Bitumen in Houston
Modified Bitumen in Houston is asphalt that has had modifiers added to it to give it plastic or rubber-like properties. The most common types of modifiers being used are APP (Atactic Polypropylene) and SBS (Styrene Butadiene Styrene). Rolls of modified bitumen membrane come in widths of 36″ (0.9 m) to approximately 39″ (1 m) and cover an area of approximately 100 square feet to 112 square feet. Surfacings for these roll materials consist of mineral granules, aluminum, copper, or an aggregate such as gravel or slag. Modified Bitumen roof systems consist of one, two, or three ply systems. The type of substrate will often determine the type of system being installed. Modified membranes can also be installed in conjunction with built-up roof materials (such as multiple plies of fiberglass felt) to form a hybrid roof system. Modifieds have proven performance on residential, commercial, and industrial applications. Brand Roofing recommends that all modified roofs be installed on slopes not less than 1/4″ per horizontal foot in order to achieve positive drainage.
APP Modifieds: In order to create roofing grade asphalt, asphalt flux is air-blown at elevated temperatures which converts the flux to roofing grade asphalt. In the early 1970’s, the Italians, lacking the blowing equipment, were looking for a product that would convert asphalt flux into a usable roofing product. They discovered that if Atactic Polypropylene (APP) – a by-product of propylene polymerization – was added to asphalt then it gave the asphalt some plastic properties. They found that by adding about 30% of APP modifier, they could stretch the modified asphalt up to fifty percent of its original length before it would break. Next came the need to make it into a usable roll product. Some type of reinforcement would be needed. They looked into various reinforcement materials and decided on a polyester mat because polyester would accommodate the APP modified asphalt’s elongation properties whereas the more commonly used woven glass mats would not. The reinforcement material is dipped into the hot modified bitumen mix, then goes through a rolling cylinder, cooled, and then wound into a roll. APP membranes are applied using a torch. The back of the sheet has extra asphalt on it which, when heated, bonds to the substrate. This was especially convenient for the smaller, more cut up roofs because less room and equipment is needed on site to torch-apply a membrane than is necessary for application using hot bitumen.
SBS Modifieds: While APP was being looked into in southern Europe, northern Europe was experimenting with a different type of modifier called Styrene Butadiene Styrene (SBS). The French and Germans found that if they added 10%-15% of SBS rubber to asphalt, the asphalt’s characteristics changed to those of the rubber additive. They learned that they could stretch the SBS modified asphalt up to six times its original length and that, unlike the APP, it would return to its original size when allowed to relax. There are a wide range of reinforcements used in SBS roofing materials. These include fiberglass or polyester mats and scrims, or combinations of both. The fiberglass mats range in weight from 1.0 to 2.5 pounds per 100 square feet or around 50 to 125 grams per square meter. Polyester reinforcements range in weight from 3.5 to 5.0 pounds per 100 square feet or 170 to 250 grams per square meter. The type of reinforcement used depends on the material’s performance requirements. SBS membranes can be hot asphalt applied, torch applied, or cold process applied.
Our Houston Modified Bitumen Contractor Provides
- tpo roof
- tpo roofing cost
- tpo roofing manufacturers
- tpo roofing material
- tpo membrane roofing system
- tpo membrane roofing
- roofing materials
- tpo roofing system
- tpo roof system
- tpo roofing systems
- tpo roofing
- tpo roofing membrane
We Provide Modified Bitumen in the Following Areas
League City, TX | Friendswood, TX | Pearland, TX | Alvin, TX | Galveston, TX | Clear Lake, TX | Houston, TX | Kemah, TX | Dickinson, TX | Spring, TX | The Woodlands, TX | Missouri City, TX | Sugar Land, TX | Jersey Village, TX | Galena Park, TX | Channelview, TX | Baytown, TX | Bellaire, TX | Aldine, TX | La Porte, TX | Katy, TX | Webster, TX | Seabrook, TX | Manvel, TX | Santa Fe, TX | Hitchcock, TX | La Marque, TX | Bacliff, TX | San Leon, TX | Humble, TX | Pasadena, TX | Deer Park, TX
Why Houston Should Hire Us for Their Modified Bitumen
Most of us are guilty of neglecting roof replacement. And yet, this part of the house is very important as it shelters us from most of the weather conditions. Often, the roof is already leaking and rusting when we recognize the problem. But that can change if only we include it as part of our home maintenance.
Regular checking for leaks, cracks and rust are essential. These elements are hastened by bad weather conditions. Clean your roof often. Make sure that the gutters are free from dirt, fallen leaves and other interference. Do the cleaning before the rain comes. This way, rainwater will just flow freely and even help remove the debris from your residential roofing. Observe if your metal roofing is still in good condition by checking out for leaks when the rain is heaviest. Sometimes, leaks are not confined to one place. Check all the rooms and check for damages.
Recent Articles About Modified Bitumen
- Different Houston Roofing Types - There are different types of Houston roofing. There are roofs that are flat, roofs that are pitched, shell roofing, gabled, cross and gabled, pyramid-shaped, hipped, cross and hipped, bonnet-type, sh...
- Roof Replacement in Houston - Sometimes shingles need to be replaced due to roof rot or due to the fact that they have broken and become damaged. If they need to be replaced you can take the broken shingle down to the local Housto...
